The U.S. Cooler Brew Cave offers an abundance of cold storage space for beer, soda or any cold beverage. It can store over 30 cases of beer and 4 or more kegs, all while keeping them cold and ready to drink. The Brew Cave is perfect for restaurants, bars, clubs, hotels, country clubs etc. It can even be used as your own private walk-in beer cave. Everything needed for your Brew Cave is included in one convenient package; refrigeration, shelving and draft beer dispensing system.
The Brew Cave is now available in one standard model size, 6’10” x 4’10” x 7’6” without a floor. The Brew Cave is available for purchase online and can be shipped directly to your location.
SPECIFICATIONS
GENERAL
Walk-ins shall be constructed of prefab, precision-formed, modular panels designed for accurate, rapid field assembly. Walk-ins shall be test assembled at the factory. Walk-ins shall be equal to those manufactured by U.S. Cooler.
DRAWINGS AND INSTRUCTIONS
Each walk-in shall have a set of installation instructions and lay-out drawing. All panels shall have panel identification corresponding with the lay-out drawing to facilitate rapid and accurate field erection.
PANEL CONSTRUCTION
Each panel shall consist of inner and outer metal skins, a 4" insulation core, and be equipped with cam-action locking devices. The locking devices shall be operable from inside the walk-in and a hex-shaped wrench shall be supplied. Press-fit plug buttons shall be provided to seal wrench holes after assembly is complete. Construction shall be as approved by the National Sanitation Foundation International and shall bear the NSF® Seal of Approval.
All panels shall be connected to one another by placing the tongue of the insulation core of one panel into the groove of the core insulation of the adjacent panel. The resultant tongue and groove joint shall be sealed at both sides by double barreled NSF® approved gaskets. In order to avoid future swelling and mold formation, no wood shall be permitted in the manufacture of the tongue and groove panel profile.
Designer metal colors are available.
FLOOR SCREEDS
Floor screeds shall be provided for all floorless walk-ins. The screeds shall be vinyl, and have NSF® approved cove both inside and out.
PANEL FINISH
Metal finish of the panels shall be as follows. Interior or exterior walls, and ceilings
• black stucco embossed galvanized
INSULATION
Extruded Polystyrene: All wall and ceiling insulation shall be 4” thick, high quality, rigid extruded polystyrene, 1.6 lb density. K factor of not more than .139 and an R factor of not less than 7.2 per inch, initial fresh R-28.8 minimum total wall R factor. Vapor transmission shall be less than 1 perm and foam core material must meet UL 5 flame spread rating with average smoke rating less than 165. (UL 723)(UL 723)
BOX SIZE
6’10” x 4’10” x 7’6” without a floor
GLASS DOORS
Anthony Model 403B normal temp, 30”x81” lockable glass entry door with LED lights. 2-pane heat reflective with argon fill, trimline black handle and frame.
SHELVING
Shelving fits the back and two side walls, 3 shelves for each wall
REFRIGERATION
Pre-assembled outside refrigeration system, medium temperature, 1 phase, 3/4 horsepower, hermetic 208/230 volt, includes Copeland condensing unit.
BEER DISPENSING KIT
Aluminum CO2 tank (empty), keg coupler, double gauge CO2 regulator, chrome faucet head, faucet knob, 5” shank, beer line with connectors, air line with clamps, tap soother faucet cap, 6” wall mount drip tray (stainless steel with drain), drip tray dimensions: 11”H, 6”W, 4 3/4”D. Multiple faucet kits available.
